What is D2 steel？ AISI D2 is a cold work tool steel.Cold work die steel D2 steel with high abrasion resistance, micro deformation, the wind hard tool steel, carbon content as high as 1.5%, chromium content as high as 11.5%, the heat treatment hardness can reach 60 HRC.
D2 Supreme™ is a cold work die and mold steel, a close equivalent to DC53®. It has excellent machining characteristics coupled with excellent wear resistance, toughness and compressive strength. It has excellent machining characteristics coupled with excellent wear resistance, toughness and compressive strength.
D2 toolsteel is a 12% chrome steel, it has very high resistance against abrasive and adhesive wear due to a high volume of hard carbides in the steel matrix, good toughness, very good dimensional stability, high compressive strength, and has a very good base material for PVD/CVD coating as well as nitriding due to its secondary hardening properties.
to Tool and die steels to Properties of steels and cast irons tool_steel_d2.txt · Last modified: 2012/06/02 by dmitri_kopeliovich Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License
Die & Tool Steel We are leading importer exporter and supplier from Mumbai, our product range includes Die & Tool Steel such as Cold Work Steel, O1 Tool Steel, D2 Die Steel and D3 Tool Steel.
D2 tool steel is used to make dies that requires close tolerances, cutting properties and long life. Stainless Steel To qualify as stainless steel, the chromium content must be at least 10 percent.
AISI D2 steel is Cold Work Steel with High Carbon High Chromium contents. The Quality with high wear resistant and toughness properties due to Vanadium addition of 0.90% . Normally it supply condition is an Annealed and will offer hardness to reach 57-59 HRC.
Cold Works D2 tool steel is a high carbon, high chromium tool steel (12% chrome) with extremely high wear resisting properties, heat treatable to 60-62 Rc. D2 steel is very wear resistant but not as tough as lower alloyed steels.
Dr. Dmitri Kopeliovich Tool and die steels are high carbon steels (either carbon or alloy) possessing high hardness, strength and wear resistance.. Tool steels are heat treatable.. In order to increase hardness and wear resistance of tool steels, alloying elements forming hard and stable carbides (chromium, tungsten, vanadium, manganese, molybdenum) are added to the composition.
Tool and die steels are high carbon steels (either carbon or alloy) possessing high hardness, strength and wear resistance. Tool steels are heat treatable in order to increase hardness and wear resistance of tool steels, alloying elements forming hard and stable carbides (chromium, tungsten, vanadium, manganese, molybdenum) are added to the composition.
toughness is required. At carbon levels of 0.35% and higher, cast-alloy-steel dies can be effectively flame-hardened at points of wear. AISI Nominal Steel Composition Percent Type C Mn Si W Cr Mo V Other D2 1450°/1500°F 788º/816ºC Slow 1800°/1875°F 982º/1,024ºC 30 min. Salt, Air D3 1450°F
die steel composition cr12 steel composition h21 steel composition p20 die steel composition h21 steel composition d3 steel composition 1.2343 die steel composition h11 steel composition d2 chemical composition for steel stainless steel alloy composition
SAE D2 tool steel is a high carbon (1.4-1.6% C), high chromium Cold tool steel (11-13% chrome), and with Very high wear resisting properties, heat treatment can be reached to 60-62 HRc. D2 steel have very wear resistant property but not as tough as lower alloy steel.
HCHCR-D2 steel is Cold Work Steel with High Carbon High Chromium contents. The Quality with high wear resistant and toughness properties due to Vanadium addition of 0.90% . Normally it supply condition is an Annealed and will offer hardness to reach 57-59 HRC.
D2: A true die steel. D2 is a die steel, thus the designation "D." It's part of the family of Tool Steels, steels used to work and form metals, woods, plastics, and other industrial materials.These steels must withstand shock loads, rapid temperature changes, high wear uses, and are generally the toughest, most wear resistant steels made.
D2 High carbon, high chromium tool steel with outstanding wear resistance. Applications include lamination dies - also widely used Especially suitable as a die steel for aluminum and magnesium die casting. The balanced alloy composition ensures a uniform cross-sectional
S-7 Hi-shock tool steel is an excellent chock steel that can be and is often used in hot work applications where the tool temperature does not exceed 1000 deg. F. This tool steel combines the qualities of high strength and good ductility for cold and medium hot work application.
D-2 Air Hardening Tool Steel D-2 tool steel is a versatile high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium rich alloy carbides in the microstructure.
Scrap Form of Tool Steel D2 Scrap/ D2 Dies Scrap / D2 Turning Scrap: End pieces of Bars, Round Offcuts, Square Billets, Foundry Type, Pipe Rings, Hollow Bars, Plate cuttings, Tools, Dies, etc.
Alibaba offers 2,905 d2 die steel products. About 18% of these are steel round bars, 3% are steel sheets, and 1% are steel pipes. A wide variety of d2 die steel options are available to you, such as hot rolled, forged, and cold drawn.
D2 tool steel is an air hardening, high-carbon, high-chromium tool steel possessing extremely high wear resisting properties. It is very deep hardening and is practically free from size change after